Fike
SITA
Cost effective single loop panels are quickly becoming the preferred choice for small to mid-size applications where the advantages of point identification are preferred over the zonal indications provided by traditional conventional systems. Fike’s CIE-A-200 provides a reliable, cost effective solution with features normally only found in larger more expensive systems. The CIE-A-200 Addressable Fire Alarm Control Panel is a one loop panel capable of supporting up to 200 devices* with a maximum loop length of 2KM, the panel also provides two configurable monitored input circuits, 2 configurable monitored output circuits, 2 configurable + 1 fault relay and also a Peripheral bus circuit to add up to 8 repeater panels.
TWINFLEXpro2
A conventional 2-wire fire alarm system is often the natural choice for smaller applications or where budget constraints exist. Fike’s TWINFLEXpro² 2-wire fire alarm system has long been known for its adaptability and cost-effectiveness within a variety of applications, big or small … making it one of the most flexible products on the market. Building on those strengths and designed for ease of use and state-of-the-art monitoring, the LPCB-Approved TWINFLEXpro² is the next generation in 2-wire fire alarm reliability. The TWINFLEXpro² two wire fire alarm system incorporating the Multipoint ASD combined smoke and heat detector with optional built-in sounder and strobe, allows the whole system to be easily installed using only one pair of wires per zone.
Apollo
The XP95 range of analogue addressable fire detectors is advanced in design, improved in performance and has unique features that benefit the installer and the end user. The detectors have been carefully researched and developed by the Apollo design team and the range has undergone rigorous testing to ensure that it meets not only European and other standards but also the demands of today’s high technology environments.
Series 65 incorporates well-proven sensing technologies, including an Integrated Circuit based on that used in XP95 analogue addressable detectors. The Series 65 range has a wide operating voltage of 9–33V and consists of ionisation, integrating ionisation and optical smoke detectors, four grades of heat detector and a range of bases.
Discovery® is a range of high-specification, analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms. In addition to the familiar smoke and heat detectors, the Discovery range features two multisensor detectors. One is an optical/heat multisensor which can be used to protect against many types of fire risk. The other is a carbon monoxide/heat multisensor which protects against both smouldering fires and those generating heat.
Hyfire
The wireless elements can be used on their own to build wholly wireless systems of virtually any size and complexity or mixed with the Hyfire wired products to provide seamless hybrid solutions. The Hyfire system is designed and manufactured to the latest British and European standards, ensuring it provides the highest levels of reliability and safety.
The Hyfire wired range of intelligent equipment utilises a digital protocol which allows the system to accommodate up to 240 devices per loop.
The system comprises of a full range of detection and alarm devices, more than capable of providing a solution to the most demanding of projects. The system has the ability to support wireless devices seamlessly alongside the wired ones via loop powered translator modules.
The new TauREX software provides the most simple and intuitive way to install, commission and maintain your Taurus system. The Taurus wireless platform can easily answer the needs of both small-medium or large sites, handling up to 128 devices per wireless translator and 240 per hybrid loop, with a 10-year battery life on input and five years on output devices. Taurus uses Hyfire NetworkOptimiser technology, with 60 communications channels to avoid interference and channel collisions, regardless to the extent of the fire network or the scale of the building. Taurus delivers unprecedented system reliability and performance using SafePath Mesh Expander Technology. If any expander in the chain fails, the transmission path uses an alternate route, ensuring communication continuity.
C-Tec
C-Tec the FP 1-14 Zone BS fire panel has been protecting people and property for almost two decades. Like the MFP, it is supplied in a robust metal enclosure with a lift-off lid and heavy-duty base connections to help promote an easy first fix and straightforward maintenance.
The FP’s broad compatibility with virtually all known conventional smoke and heat detector ranges – a feature common to all of C-TEC’s conventional fire panels – and its ability to interpret a short circuit in any zone(s) as a fire or fault make it particularly useful for retro-installations.
Optional head out monitoring units are also available for systems requiring compliance with BS5839-1.
Morley
Morley The ZX5e is an intelligent fire alarm control panel. It has been designed and is constructed around proven and reliable microprocessor technology. This simple approach has produced a modular, scalable fire alarm platform suitable for protecting all types of premises.
The ZX5e control panel supports a total of five industry leading protocols, allowing fire detection devices to be independently selected based on performance or aesthetic appeal. The ZX series control panels seamlessly integrates with Apollo (Xplorer, XP95 & Discovery), Hochiki ESP, Nittan, Morley-IAS and System Sensor detection device protocols.
Designed for maximum flexibility the ZX5e control panel is supported by a complete suite of peripherals and software tools.
Information on the location of fires, faults and system status can easily be displayed or printed in multiple locations. Integration to Voice Evacuation Systems, paging systems and third party control systems is supported through a range of peripheral interface units.
This adaptability, support and intelligence means that the ZX5e is suitable for new projects, system expansions, retrofits and system upgrades in all application areas.
Offices, industrial units, multi-storey buildings, entertainment venues, industrial plants and hospitals are a few of the many applications that can benefit from the features of the ZX5e intelligent multi-protocol fire alarm control panel..
Advanced Fire Systems
It is the result of decades of fire alarm and detection experience and a research and development involving installers, specifiers, consultants and end users across the world.
MxPro 5 has been designed to offer more power and performance in a user-friendly enclosure. It packs more configuration, display, status and control options into its interface as standard than any other Advanced fire panel, which means less time and expense customising a system with peripherals.
MxPro 5 is also compatible with AlarmCalm, the fire alarm false alarm management solution from Advanced.
Hochiki Fire Detectors
Hochiki is distinguished by the experience and expertise of nearly 100 years as one of the world’s largest manufacturers and suppliers of industrial fire detection products.
Hochiki Corporation was founded in Tokyo in 1918 with most of the major Japanese insurance companies as founder shareholders.
Hochiki Corporation undertakes design, manufacture, installation and maintenance of fire alarm systems and produces in excess of 3 million units per year. An international market leader in the manufacture of fire protection products Hochiki Corporation also produces fire extinguishing, security and cable television systems.
Hochiki FIREscape
Moving away from bulk heads and central battery systems, Hochiki offers a completely unique, cost effective and fully compliant emergency lighting system. FIREscape is based around an addressable, emergency lighting control panel with battery back-up and features addressable, self-contained LED luminaires and exit signage connected via screened, extra-low voltage (40V) cabling. Furthermore, FIREscape is a fully self-monitored and self-testing system with a central point of control; making installation and maintenance quick and easy.
Vimpex
Vimpex are acknowledged experts in voice sounder and audible/visual evacuation technology.The Fire-Cryer® Voice Sounder is testimony to Vimpex’s enthusiasm for innovation and a fresh approach to evacuation. From our highly efficient distribution warehouse, Vimpex can supply a complete range of voice sounders, audible and visual alarms and accessories. Most products can be brand labelled if required. Loyalty to third party approval and testing has meant massive investment, both by Vimpex and its suppliers, to gain third party approval on all fire products.
Hydrosense leak detection systems are designed to protect areas where water ingress could seriously damage electrical, communication and computer networks. It continuously monitors for water leaks around the clock, year in year out and has the facility for 72 hour battery standby in the event of power failure. Should a leak be detected the control panel sounds an alarm which can be extended to a remote location. When an alarm is raised, Hydro-Cryer® voice sounders can be used to broadcast an unambiguous message, avoiding confusion with other sounders on site.
The Banshee Excel range of sounders, beacons, sounder beacons and accessories represents the most modern, acoustically advanced and by far the most versatile range of conventional electronic sounders, combined units and dedicated beacons available on the market today.
