Description

45681-330APO – Intelligent Sounder Visual Indicator Base with Isolator

The Sounder Visual Indicator Base is a loop-powered sounder and visual indicator combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas.

The low volume range is useful in areas such as hospitals where a fire alert is initially intended to warn staff only. The sounder is set to the high range for general use.

Synchronisation of tones ensures the integrity of the signal—tones from different sounders do not merge into one signal that could be mistaken for a different tone.

Group addressing is a simple method of alerting an
entire area or group of rooms without delay.
For systems requiring isolators at every point the built-in isolator saves installation time and cost.

The acoustic self-test means that the sounder listens to itself when it is switched on. If no sound is detected a fault signal is transmitted when the sounder is polled.

The beacon self test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the sounder beacon base has been switched on a fault signal is transmitted when the device is next polled.

Key Features
  • Two volume ranges 55-75dB(A) and 75-91dB(A)
  • Visual indicator flash rate of once per second
  • Synchronisation of ‘alert’ and ‘evacuate’ tones
  • Synchronisation of visual indicator flash
  • Individual and group addressing
  • Unique acoustic and visual indicator self-test
  • Built-in Isolator